| Sid911 | Дата: Четверг, 09.01.2020, 15:02 | Сообщение # 1 |
|
Группа: Проверенные
Сообщений: 9
Репутация: 0
Статус: Offline
| Изначально камера работала 3 года без проблем потом пропала из сети. Сбросились настройки на заводские .Я снова настроил .Через месяц писала не верный пароль.Пробовал сбросить через TELNET не подключается .Прошил она сдохла .Залил вот эту 5.30 Downgrader.rar нашёл на форуме. SADPT не видит её.Уже 2 недели поднять не могу .Лог загрузки
U-Boot 1.3.4-121219 (Apr 8 2015 - 14:34:29)
ARM Clock: 480MHz
DDR Clock: 336MHz
Hit Ctrl+u to stop autoboot: 0
|NUL eth|
Unknown command:null
booting from sec part...
load kernel...
load ramdisk...
init started: BusyBox v1.19.3 (2014-07-11 11:25:54 CST)
starting pid 375, tty '': '/etc/init.d/rcS'
Starting udev: [ OK ]
starting pid 606, tty '': '/sbin/iptables -A INPUT -p tcp --dport 23 -j DROP'
starting pid 607, tty '': '/sbin/iptables -A INPUT -p tcp --dport 22 -j DROP'
starting pid 608, tty '': '/sbin/iptables -A INPUT -p tcp --dport 21 -j DROP'
starting pid 609, tty '': '/sbin/inetd -f -e /etc/inetd.conf'
starting pid 610, tty '': '-/bin/sh'
BusyBox v1.19.3 (2014-07-11 11:25:54 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
UBI device number 2, total 192 LEBs (24772608 bytes, 23.6 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB)
waiting for /dev/ubi2_0.
Check dir /davinci ok! (0)
UBI device number 3, total 32 LEBs (4128768 bytes, 3.9 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB)
waiting for /dev/ubi3_0.
Check dir /davinci ok! (0)
UBI device number 4, total 32 LEBs (4128768 bytes, 3.9 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB)
waiting for /dev/ubi4_0.
Check dir /config ok! (0)
Hit Ctrl+c to stop and exec /home/initrun.sh to continue
route: ioctl 0x890c failed: No such process
^C
#
#
# U-Boot 1.3.4-121219 (Apr 8 2015 - 14:34:29)
-/bin/sh: syntax error: unexpected "("
#
# ARM Clock: 480MHz
-/bin/sh: ARM: not found
# DDR Clock: 336MHz
-/bin/sh: DDR: not found
# Hit Ctrl+u to stop autoboot: 0
-/bin/sh: Hit: not found
# |NUL eth|
-/bin/sh: syntax error: unexpected "|"
# Unknown command:null
-/bin/sh: Unknown: not found
# booting from sec part...
-/bin/sh: booting: not found
# load kernel...
-/bin/sh: load: not found
# load ramdisk...
-/bin/sh: load: not found
# init started: BusyBox v1.19.3 (2014-07-11 11:25:54 CST)
-/bin/sh: syntax error: unexpected "("
# starting pid 375, tty '': '/etc/init.d/rcS'
-/bin/sh: starting: not found
# Starting udev: [ OK ]
-/bin/sh: Starting: not found
# starting pid 606, tty '': '/sbin/iptables -A INPUT -p tcp --dport 23 -j DROP'
-/bin/sh: starting: not found
# starting pid 607, tty '': '/sbin/iptables -A INPUT -p tcp --dport 22 -j DROP'
-/bin/sh: starting: not found
# starting pid 608, tty '': '/sbin/iptables -A INPUT -p tcp --dport 21 -j DROP'
-/bin/sh: starting: not found
# starting pid 609, tty '': '/sbin/inetd -f -e /etc/inetd.conf'
-/bin/sh: starting: not found
# starting pid 610, tty '': '-/bin/sh'
-/bin/sh: starting: not found
#
#
# BusyBox v1.19.3 (2014-07-11 11:25:54 CST) built-in shell (ash)
-/bin/sh: syntax error: unexpected "("
# Enter 'help' for a list of built-in commands.
-/bin/sh: Enter: not found
#
# UBI device number 2, total 192 LEBs (24772608 bytes, 23.6 MiB), available 0 LE
Bs (0 bytes), LEB size 129024 bytes (126.0 KiB)
-/bin/sh: syntax error: unexpected "("
# waiting for /dev/ubi2_0.
-/bin/sh: waiting: not found
# Check dir /davinci ok! (0)
-/bin/sh: syntax error: unexpected "("
# UBI device number 3, total 32 LEBs (4128768 bytes, 3.9 MiB), available 0 LEBs
(0 bytes), LEB size 129024 bytes (126.0 KiB)
-/bin/sh: syntax error: unexpected "("
# waiting for /dev/ubi3_0.
-/bin/sh: waiting: not found
# Check dir /davinci ok! (0)
-/bin/sh: syntax error: unexpected "("
# UBI device number 4, total 32 LEBs (4128768 bytes, 3.9 MiB), available 0 LEBs
(0 bytes), LEB size 129024 bytes (126.0 KiB)
-/bin/sh: syntax error: unexpected "("
# waiting for /dev/ubi4_0.
-/bin/sh: waiting: not found
# Check dir /config ok! (0)
-/bin/sh: syntax error: unexpected "("
# Hit Ctrl+c to stop and exec /home/initrun.sh to continue
-/bin/sh: Hit: not found
# route: ioctl 0x890c failed: No such process
Помогите люди добрые уже не знаю что с ней делать
|
| |
|
|
| Sid911 | Дата: Понедельник, 27.01.2020, 09:27 | Сообщение # 11 |
|
Группа: Проверенные
Сообщений: 9
Репутация: 0
Статус: Offline
| Sadp камеру не видит
вот что происходит когда камера включена
waiting for /dev/ubi3_0.Check dir /davinci ok! (0)
UBI device number 4, total 32 LEBs (4128768 bytes, 3.9 MiB), available 0 LEBs (0
bytes), LEB size 129024 bytes (126.0 KiB)
waiting for /dev/ubi4_0.
Check dir /config ok! (0)
Hit Ctrl+c to stop and exec /home/initrun.sh to continue
route: ioctl 0x890c failed: No such process
/dav
map_size = 0x300000
nr_item = 3
addr_offset = 0x0 filename = orccode.bin
addr_offset = 0x200000 filename = orcme.bin
addr_offset = 0x2a0000 filename = default_binary.bin
mmap returns 0x402db000
loading ./orccode.bin...addr = 0x402db000, size = 0x19f02d
loading ./orcme.bin...addr = 0x404db000, size = 0x36374
loading ./default_binary.bin...addr = 0x4057b000, size = 0x40000
===============================
u_code version = 2013/10/24 3.0
===============================
ln: check_rs232: File exists
ln: /dev/rtc: File exists
=====check_config start=====
===main db is ok===
start unix bus daemon
netprocess version: In branch 5.2.3: 1.2.4 [11:28:53-Oct 13 2014].
No need to recover kernel pri partition.
No need to recover ramdisk pri partition.
[01-10 13:55:08][pid:844] [IPC][ERROR]from daemon ack, dst not work len 0 , loa
d_type is [10012]
[01-10 13:55:08][pid:844][UNI_IF][ERROR]65554:ipc_unix_call_service failed, ret
= -3.
[01-10 13:55:08][pid:844][UNI_IF][ERROR]communicaite_to_davinci failed!!!
[01-10 13:55:08][pid:838][IPC][ERROR]daemon can not find Dst process.load_type 0
x10012 is_need_ack 1
[01-10 13:55:09][pid:852][CAPA][ERROR]resolution_num_temp = 3
[01-10 13:55:09][pid:852][CAPA][ERROR]resolution_num_temp = 3
[01-10 13:55:09][pid:852][CAPA][ERROR]resolution_num_temp = 4
[01-10 13:55:09][pid:852][CAPA][ERROR]resolution_num_temp = 4
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
==================PPPoE is disable!!!
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
========capture_mode_pal=17, capture_mode_ntsc=18===============.
powerLineFrequencyMode = 0
@@@motion PAL!!!!!!!!!!!!!!!!!
[01-10 13:55:11][pid:852][UNI_IF][ERROR]stream request out range 3(2)
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
IEfile uncompressed.
get 0-0-0-0.000000-0-0-0
[01-10 13:55:12][pid:852][SYSINIT][ERROR]device not support RS485
[01-10 13:55:12][pid:852][HW_IF][ERROR]transfer_485_config_options error [option
s:57]
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
<DSP> DBG:init_dsp_lib() begin
<DSP> DBG:init_dsp_lib() end
[01-10 13:55:18][pid:852][DSP][ERROR][2]g_pdsp->audioTBShare.frameLen=80, g_pdsp
->audioTBShare.totalFrame=128..
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
mknod: /dev/snd/controlC0: File exists
mknod: /dev/snd/pcmC0D0c: File exists
mknod: /dev/snd/pcmC0D0p: File exists
[01-10 13:55:18][pid:852][HW_IF][ERROR]<read_fixed_noise_info_from_flash> (CFG_M
AGIC != read.magicNumber(ffffffff)
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
# davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
<DSP> DBG:setup_dsp() begin
<DSP> DBG:init_cmem_module:cached_size=33030144(31M),noncached_size=6815744(6M)
init_cmem_module:CMEM_cmdline=insmod /dav/cmemk.ko phys_start=0xc6600000 phys_en
d=0xc8c00000 pools=1x33030144,1x6815744
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
gdma Init Successful
b_fd=0,b_smd=1,b_scd=0
channel 1 is not 1 or 2<DSP> DBG:DSP start with Vout:Disabled,Audio:Disabled,VT:
Disabled,MD:Enabled, vsync_guard:Enabled,vout_osd: Disabled, oversampling:Disabl
ed, roi: Enabled, primacy: Disabled . hdr mode Disabled qr Disabled
<DSP> DBG:dsp_object.device_mode 0
<DSP> DBG:enc channel cnt 2, delay mode 0
Use CMEM buffer!
goto_idle done
pDspInitPara->VideoInitParam.capture_mode 125967385
find_video_mode sucusss!! mode 125967385 p_mode_table.vin_mode 30 vin_object.
vin_fps 25.000000 vin w 1920 h 1080
set mode 30 type 21
vin_mode 2304*1296 vin_mode_temp 2304*1296 vin_mode_temp2 2304*1296#######pDspIn
itPara vout enable 0
<VidThrd> DBG:update_encode_fps_ctrl: Begin chan=0,maxRate(maxFps)=25.000000,fps
=0x1
<VidThrd> DBG:update_encode_fps_ctrl: f_frame_rate=1.000000,clockStep=45000
<VidThrd> DBG:update_encode_fps_ctrl:Finally chan=0,fps=0x1,fpsFlg=0x1,frmPerSec
=1,fpsCounter=0,fpsCycle=25,g_md_interval 5 ms
<VidThrd> DBG:update_encode_fps_ctrl: Begin chan=1,maxRate(maxFps)=25.000000,fps
=0x19
<VidThrd> DBG:update_encode_fps_ctrl: f_frame_rate=25.000000,clockStep=1800
<VidThrd> DBG:update_encode_fps_ctrl:f_frame_rate=25.000000,[25].clockStep=1800,
[25]
<VidThrd> DBG:update_encode_fps_ctrl:Finally chan=1,fps=0x19,fpsFlg=0x1ffffff,fr
mPerSec=25,fpsCounter=0,fpsCycle=25,g_md_interval 5 ms
<VidThrd> DBG:update_video_config_param: chan=1,encode_type=1, (1920x10
80), mirror type0, I inerval 50, bps 4014,quality 60 i_quant 29, c
omplexity 1 rate_type 1,p_encode_param->f_frame_rate 25.000000,svc mode 0 qp 6
<chan 1> in None MotionJPEG, skip!
<VidThrd> DBG:update_encode_fps_ctrl: Begin chan=2,maxRate(maxFps)=25.000000,fps
=0x19
<VidThrd> DBG:update_encode_fps_ctrl: f_frame_rate=25.000000,clockStep=1800
<VidThrd> DBG:update_encode_fps_ctrl:f_frame_rate=25.000000,[25].clockStep=1800,
[25]
<VidThrd> DBG:update_encode_fps_ctrl:Finally chan=2,fps=0x19,fpsFlg=0x1ffffff,fr
mPerSec=25,fpsCounter=0,fpsCycle=25,g_md_interval 5 ms
<VidThrd> DBG:update_video_config_param: chan=2,encode_type=1, (352x288
), mirror type0, I inerval 50, bps 501,quality 60 i_quant 29, complexi
ty 1 rate_type 1,p_encode_param->f_frame_rate 25.000000,svc mode 0 qp 6
<chan 2> in None MotionJPEG, skip!
overlay: start = 0x4397f000, total size = 0x100000 ( bytes)
b_rotate 0 overlay_level64 width 1920 height 1072
osd_width 1280 osd_scale_first 64 total 81920
b_rotate 0 overlay_level16 width 352 height 288
osd_width 256 osd_scale_first 16 sub total 4096
init osd area success
init osd memory ok
<OSD> DBG:Left=0 pChar->pos=4000000
<SetOsd()> line=0 y=64 line_char_count=16, valid char count 24,osd_lines 0
<SetOsd()> line=1 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=2 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=3 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=4 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=5 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=6 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=7 y=0 line_char_count=0, valid char count 0,osd_lines 0
chan 1, osd size 0 osd_size_changed 1
chan 2, osd size 0 osd_size_changed 1
b_rotate 0 overlay_level16 width 1920 height 1072
osd_width 1280 osd_scale_first 16 total 20480
b_rotate 0 overlay_level16 width 352 height 288
osd_width 256 osd_scale_first 16 sub total 4096
init osd area success
<OSD> DBG:setosd ok
<OSD> DBG:setosd:END. chan=0,flgOsd=0x1, bStart=1
<OSD> DBG:Left=0 pChar->pos=4000000
<SetOsd()> line=0 y=64 line_char_count=16, valid char count 24,osd_lines 0
<SetOsd()> line=1 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=2 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=3 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=4 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=5 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=6 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=7 y=0 line_char_count=0, valid char count 0,osd_lines 0
chan 1, osd size 0 osd_size_changed 0
chan 2, osd size 0 osd_size_changed 0
<OSD> DBG:setosd ok
<OSD> DBG:setosd:END. chan=1,flgOsd=0x3, bStart=1
<OSD> DBG:Left=0 pChar->pos=4000000
<SetOsd()> line=0 y=64 line_char_count=16, valid char count 24,osd_lines 0
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
<SetOsd()> line=1 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=2 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=3 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=4 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=5 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=6 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=7 y=0 line_char_count=0, valid char count 0,osd_lines 0
chan 1, osd size 0 osd_size_changed 0
chan 2, osd size 0 osd_size_changed 0
<OSD> DBG:setosd ok
<OSD> DBG:setosd:END. chan=2,flgOsd=0x7, bStart=1
init osd success
<VidThrd> DBG:setup_video_input begin
<VidThrd> ERR:Please load source driver!
<VidThrd> ERR:set video source failed!
<DSP> ERR:setup_dsp:setup_video_input
[01-10 13:55:26][pid:852][DSP][ERROR]DSP ³õʼ»¯Ê§°Ü...
[01-10 13:55:26][pid:852][SYSINIT][ERROR]hwif_dsp_init error force sys reboot,re
t=-12!!!!
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S:à
U-Boot 1.3.4-121219 (Apr 8 2015 - 14:34:29)
ARM Clock: 480MHz
DDR Clock: 336MHz
Hit Ctrl+u to stop autoboot: 0
|NUL eth|
Unknown command:null
booting from pri part...
load kernel...
load ramdisk...
init started: BusyBox v1.19.3 (2014-07-11 11:25:54 CST)
starting pid 375, tty '': '/etc/init.d/rcS'
Starting udev: [ OK ]
starting pid 606, tty '': '/sbin/iptables -A INPUT -p tcp --dport 23 -j DROP'
starting pid 607, tty '': '/sbin/iptables -A INPUT -p tcp --dport 22 -j DROP'
starting pid 608, tty '': '/sbin/iptables -A INPUT -p tcp --dport 21 -j DROP'
starting pid 609, tty '': '/sbin/inetd -f -e /etc/inetd.conf'
starting pid 610, tty '': '-/bin/sh'
BusyBox v1.19.3 (2014-07-11 11:25:54 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
UBI device number 1, total 192 LEBs (24772608 bytes, 23.6 MiB), available 0 LEBs
(0 bytes), LEB size 129024 bytes (126.0 KiB)
waiting for /dev/ubi1_0.
Check dir /dav ok! (0)
UBI device number 3, total 32 LEBs (4128768 bytes, 3.9 MiB), available 0 LEBs (0
bytes), LEB size 129024 bytes (126.0 KiB)
waiting for /dev/ubi3_0.
Check dir /davinci ok! (0)
UBI device number 4, total 32 LEBs (4128768 bytes, 3.9 MiB), available 0 LEBs (0
bytes), LEB size 129024 bytes (126.0 KiB)
waiting for /dev/ubi4_0.
Check dir /config ok! (0)
Hit Ctrl+c to stop and exec /home/initrun.sh to continue
route: ioctl 0x890c failed: No such process
/dav
map_size = 0x300000
nr_item = 3
addr_offset = 0x0 filename = orccode.bin
addr_offset = 0x200000 filename = orcme.bin
addr_offset = 0x2a0000 filename = default_binary.bin
mmap returns 0x4031b000
loading ./orccode.bin...addr = 0x4031b000, size = 0x19f02d
loading ./orcme.bin...addr = 0x4051b000, size = 0x36374
loading ./default_binary.bin...addr = 0x405bb000, size = 0x40000
===============================
u_code version = 2013/10/24 3.0
===============================
ln: check_rs232: File exists
ln: /dev/rtc: File exists
=====check_config start=====
===main db is ok===
start unix bus daemon
netprocess version: In branch 5.2.3: 1.2.4 [11:28:53-Oct 13 2014].
No need to recover kernel pri partition.
No need to recover ramdisk pri partition.
[01-10 13:55:55][pid:844] [IPC][ERROR]from daemon ack, dst not work len 0 , loa
d_type is [10012]
[01-10 13:55:55][pid:844][UNI_IF][ERROR]65554:ipc_unix_call_service failed, ret
= -3.
[01-10 13:55:55][pid:844][UNI_IF][ERROR]communicaite_to_davinci failed!!!
[01-10 13:55:55][pid:838][IPC][ERROR]daemon can not find Dst process.load_type 0
x10012 is_need_ack 1
[01-10 13:55:56][pid:852][CAPA][ERROR]resolution_num_temp = 3
[01-10 13:55:56][pid:852][CAPA][ERROR]resolution_num_temp = 3
[01-10 13:55:56][pid:852][CAPA][ERROR]resolution_num_temp = 4
[01-10 13:55:56][pid:852][CAPA][ERROR]resolution_num_temp = 4
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_paramДобавлено (27.01.2020, 09:29)
---------------------------------------------
продолжение
==================PPPoE is disable!!!
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
========capture_mode_pal=17, capture_mode_ntsc=18===============.
powerLineFrequencyMode = 0
@@@motion PAL!!!!!!!!!!!!!!!!!
[01-10 13:55:58][pid:852][UNI_IF][ERROR]stream request out range 3(2)
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
get samplerate [2]
IEfile uncompressed.
get 0-0-0-0.000000-0-0-0
[01-10 13:55:59][pid:852][SYSINIT][ERROR]device not support RS485
[01-10 13:55:59][pid:852][HW_IF][ERROR]transfer_485_config_options error [option
s:57]
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
<DSP> DBG:init_dsp_lib() begin
<DSP> DBG:init_dsp_lib() end
[01-10 13:56:05][pid:852][DSP][ERROR][2]g_pdsp->audioTBShare.frameLen=80, g_pdsp
->audioTBShare.totalFrame=128..
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
mknod: /dev/snd/controlC0: File exists
mknod: /dev/snd/pcmC0D0c: File exists
mknod: /dev/snd/pcmC0D0p: File exists
[01-10 13:56:05][pid:852][HW_IF][ERROR]<read_fixed_noise_info_from_flash> (CFG_M
AGIC != read.magicNumber(ffffffff)
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
# davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
<DSP> DBG:setup_dsp() begin
<DSP> DBG:init_cmem_module:cached_size=33030144(31M),noncached_size=6815744(6M)
init_cmem_module:CMEM_cmdline=insmod /dav/cmemk.ko phys_start=0xc6600000 phys_en
d=0xc8c00000 pools=1x33030144,1x6815744
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
gdma Init Successful
b_fd=0,b_smd=1,b_scd=0
channel 1 is not 1 or 2<DSP> DBGSP start with Voutisabled,Audioisabled,VT:
Disabled,MD:Enabled, vsync_guard:Enabled,vout_osd: Disabled, oversamplingisabl
ed, roi: Enabled, primacy: Disabled . hdr mode Disabled qr Disabled
<DSP> DBG:dsp_object.device_mode 0
<DSP> DBG:enc channel cnt 2, delay mode 0
Use CMEM buffer!
goto_idle done
pDspInitPara->VideoInitParam.capture_mode 125967385
find_video_mode sucusss!! mode 125967385 p_mode_table.vin_mode 30 vin_object.
vin_fps 25.000000 vin w 1920 h 1080
set mode 30 type 21
vin_mode 2304*1296 vin_mode_temp 2304*1296 vin_mode_temp2 2304*1296#######pDspIn
itPara vout enable 0
<VidThrd> DBG:update_encode_fps_ctrl: Begin chan=0,maxRate(maxFps)=25.000000,fps
=0x1
<VidThrd> DBG:update_encode_fps_ctrl: f_frame_rate=1.000000,clockStep=45000
<VidThrd> DBG:update_encode_fps_ctrl:Finally chan=0,fps=0x1,fpsFlg=0x1,frmPerSec
=1,fpsCounter=0,fpsCycle=25,g_md_interval 5 ms
<VidThrd> DBG:update_encode_fps_ctrl: Begin chan=1,maxRate(maxFps)=25.000000,fps
=0x19
<VidThrd> DBG:update_encode_fps_ctrl: f_frame_rate=25.000000,clockStep=1800
<VidThrd> DBG:update_encode_fps_ctrl:f_frame_rate=25.000000,[25].clockStep=1800,
[25]
<VidThrd> DBG:update_encode_fps_ctrl:Finally chan=1,fps=0x19,fpsFlg=0x1ffffff,fr
mPerSec=25,fpsCounter=0,fpsCycle=25,g_md_interval 5 ms
<VidThrd> DBG:update_video_config_param: chan=1,encode_type=1, (1920x10
80), mirror type0, I inerval 50, bps 4014,quality 60 i_quant 29, c
omplexity 1 rate_type 1,p_encode_param->f_frame_rate 25.000000,svc mode 0 qp 6
<chan 1> in None MotionJPEG, skip!
<VidThrd> DBG:update_encode_fps_ctrl: Begin chan=2,maxRate(maxFps)=25.000000,fps
=0x19
<VidThrd> DBG:update_encode_fps_ctrl: f_frame_rate=25.000000,clockStep=1800
<VidThrd> DBG:update_encode_fps_ctrl:f_frame_rate=25.000000,[25].clockStep=1800,
[25]
<VidThrd> DBG:update_encode_fps_ctrl:Finally chan=2,fps=0x19,fpsFlg=0x1ffffff,fr
mPerSec=25,fpsCounter=0,fpsCycle=25,g_md_interval 5 ms
<VidThrd> DBG:update_video_config_param: chan=2,encode_type=1, (352x288
), mirror type0, I inerval 50, bps 501,quality 60 i_quant 29, complexi
ty 1 rate_type 1,p_encode_param->f_frame_rate 25.000000,svc mode 0 qp 6
<chan 2> in None MotionJPEG, skip!
overlay: start = 0x43c10000, total size = 0x100000 ( bytes)
b_rotate 0 overlay_level64 width 1920 height 1072
osd_width 1280 osd_scale_first 64 total 81920
b_rotate 0 overlay_level16 width 352 height 288
osd_width 256 osd_scale_first 16 sub total 4096
init osd area success
init osd memory ok
<OSD> DBG:Left=0 pChar->pos=4000000
<SetOsd()> line=0 y=64 line_char_count=16, valid char count 24,osd_lines 0
<SetOsd()> line=1 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=2 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=3 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=4 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=5 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=6 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=7 y=0 line_char_count=0, valid char count 0,osd_lines 0
chan 1, osd size 0 osd_size_changed 1
chan 2, osd size 0 osd_size_changed 1
b_rotate 0 overlay_level16 width 1920 height 1072
osd_width 1280 osd_scale_first 16 total 20480
b_rotate 0 overlay_level16 width 352 height 288
osd_width 256 osd_scale_first 16 sub total 4096
init osd area success
<OSD> DBG:setosd ok
<OSD> DBG:setosd:END. chan=0,flgOsd=0x1, bStart=1
<OSD> DBG:Left=0 pChar->pos=4000000
<SetOsd()> line=0 y=64 line_char_count=16, valid char count 24,osd_lines 0
<SetOsd()> line=1 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=2 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=3 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=4 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=5 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=6 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=7 y=0 line_char_count=0, valid char count 0,osd_lines 0
chan 1, osd size 0 osd_size_changed 0
chan 2, osd size 0 osd_size_changed 0
<OSD> DBG:setosd ok
<OSD> DBG:setosd:END. chan=1,flgOsd=0x3, bStart=1
<OSD> DBG:Left=0 pChar->pos=4000000
<SetOsd()> line=0 y=64 line_char_count=16, valid char count 24,osd_lines 0
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
<SetOsd()> line=1 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=2 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=3 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=4 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=5 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=6 y=0 line_char_count=0, valid char count 0,osd_lines 0
<SetOsd()> line=7 y=0 line_char_count=0, valid char count 0,osd_lines 0
chan 1, osd size 0 osd_size_changed 0
chan 2, osd size 0 osd_size_changed 0
<OSD> DBG:setosd ok
<OSD> DBG:setosd:END. chan=2,flgOsd=0x7, bStart=1
init osd success
<VidThrd> DBG:setup_video_input begin
<VidThrd> ERR:Please load source driver!
<VidThrd> ERR:set video source failed!
<DSP> ERR:setup_dsp:setup_video_input
[01-10 13:56:13][pid:852][DSP][ERROR]DSP ³õʼ»¯Ê§°Ü...
[01-10 13:56:13][pid:852][SYSINIT][ERROR]hwif_dsp_init error force sys reboot,re
t=-12!!!!
davinci receive cmd_query_davinci_param.
S: cmd_query_davinci_param
davinci receive cmd_query_davinci_param.
S:ü
U-Boot 1.3.4-121219 (Apr 8 2015 - 14:34:29)
ARM Clock: 480MHz
DDR Clock: 336MHz
Hit Ctrl+u to stop autoboot: 0
|NUL eth|
Unknown command:null
booting from pri part...
load kernel...
load ramdisk...
init started: BusyBox v1.19.3 (2014-07-11 11:25:54 CST)
starting pid 375, tty '': '/etc
|
| |
|
|
